MT3608 Boost Converter MT3608 2A Max DC-DC Step Up Power Module Booster Power Module

The MT3608 Boost Converter is a low-cost module that can step up a 2 to 24V input voltage up to a 5 to 28V output at up to 2A. DC-DC boost converters step up the input voltage to a higher voltage while also stepping down the available current since the module can’t output more power than its inputs.

This MT3608 Boost Converter is adjustable and capable of outputting a voltage in the range of 5.0 to 28V at a continuous current of up to 1.5A depending on input/output voltage settings with 1A available with most settings. Since it is a boost converter, the input voltage must be lower than the output voltage.

The MT3608 Boost Converter can use low ESR bulk ceramic capacitors rather than electrolytic caps which avoids long-term aging concerns and contributes to the compact packaging. The MT3608 Boost Converter IC has over-current and thermal limiting features built-in to safely shut the device down if driven too hard.

Specification:

• Input Voltage: 2 ~ 24V
• Max. Output Current: 2A
• Operating Temperature: -40 to 90°C
• Efficiency: 93%

Features:

• It’s efficient by up to 93%.
• It can source a good amount of current.
• It is an inexpensive converter module.
• It’s simple to adjust to get your desired increase in voltage.

Voltage Adjustment:

• The MT3608 Boost Converter has a single-turn potentiometer for adjustment of the output voltage.
• Turning the pot CW decreases the output voltage while turning it CCW increases the output voltage.
• The upper limit of the adjustment range will depend on the input voltage and the load. With a 9V input for instance, at 1A, the upper voltage limit will be approximately 20V.

Pin Description:

• VIN+: Input Voltage
• VIN-: Ground
• VOUT+: Output Voltage
• VOUT-: Ground. Connected to VIN- on the module.

Package Included:

1 x MT3608 Boost Converter MT3608 2A Max DC-DC Step Up Power Module Booster Power Module