ST-LINK V2 Debugger and Programmer In-Circuit Debugger STM8/32 Debugger STM8/32 Programmer In-Circuit Programmer for STM8 and STM32 Microcontrollers

Description:

The ST-LINK V2 Debugger and Programmer for the STM8 and STM32 microcontrollers. The single-wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces communicate with any STM8 or STM32 microcontroller on an application board. In addition to providing the same functionalities as the ST-LINK/V2, the ST-LINK/V2-ISOL features digital isolation between the PC and the target application board. It also withstands voltages of up to 1000 V_rms.

STM8 applications use the USB full-speed interface to communicate with the ST Visual Develop (STVD-STM8) or ST Visual Programmer (STVP-STM8) software, or with integrated development environments from third parties.

Specifications:

• Cable Type: A to mini B cable
• Interface: SWIM
• Operating Voltage: 5V

Features:

• 5V power supplied by a USB connector
• USB 2.0 full-speed compatible interface
• USB standard A to mini B cable
• 1.65V to 5.5V application voltage supported on the SWIM interface
• SWIM low-speed and high-speed modes supported
• 1.65V to 3.6V application voltage supported on the JTAG/SWD interface and 5V tolerant inputs
• Direct firmware update feature supported
• Status LED which blinks during communication with the PC

Package Included:

1 x ST-LINK V2 Debugger and Programmer In-Circuit Debugger STM8/32 Debugger STM8/32 Programmer In-Circuit Programmer for STM8 and STM32 Microcontrollers