Radiolink AT10II-
This is Radiolink AT10II 12 Channels RC Transmitter with Receiver R12DS. Its DSSS&FHSS communication technology and 7dBi high gain antenna make an AT10II transmitter with a stable transmission signal and the control range is up to 2.5 miles(4km) in the air. It has an Airplane voltage monitor on the AT10II screen when paired with PRM-01(package included). When AT10II is equipped with PRM-03(sold separately) module and flight controller crossflight APM, Pixhawk, and Mini Pix, to enable telemetry information on the radio’s screen like battery voltage, speed, altitude, RSSI, distance, and more.
It has 12 channels, Battery Voltage Telemetry, RSSI telemetry, Dual/Triple Rates, Throttle Lock, Fail-safe Setting, End Point Adjustment(EPA), Switch Customized, channel mix Control, etc. It is compatible with receiver R12DS, R12DSM, R9DS, R6DS, and R6DSM. 15 models of storage and quicks to switch models: helicopter, quadcopter, fixed wing, glider, cars, BoxBot, and boats. It supports a basic menu and an advanced menu for different user needs and the user interface is quite intuitive and easy to navigate. No need for any radio setting to bind the transmitter with receivers.
It has Signal Strength Indicator (RSSI) Alerts, low voltage alarms, and failsafe protection. DD sounds and words alarming display on the 3.5″ LCD screen to remind you when you are in noisy surroundings. And it has A large 3.5-inch 320*480 resolution colour display that is easy to read. Background colour can switch from black to white.
Specifications
AT10II RC Transmitter Specifications-
- Channels: 12CH
- Control Distance: Up to 4000 meters in the air
- Frequency: 2.4GHz ISM bands (2400MHz to 2483.5MHz)
- Channel Bandwidth: 5.0 MHz
- Spread Spectrum: DSSS&FHSS
- Adjacent Channel Rejection: 38dbm
- Transmitter Power: <100mW (20dbm )
- Operating Current: <90mA
- Operating Voltage: 7.4~15.0V
- Section Precision: 4096
- Screen: 3.5 inches 16 colorful screen, 320*480 pixels
- Support receivers: R12DS, R9DS, R6DS, R6DSM, and R12DSM
R12DS Receiver Specifications-
- Signal: SBUS, PWM
- Channel: PWM 12 channels, SBUS 12 channels
- Working Voltage: 4.8-10V
- Working Current: 38-45mA(input voltage: 5V)
Prm-01 Voltage Telemetry Module Specifications-
- Voltage Input Range: 1S~6S LiPo Battery
- Compatible receiver: R12DS, R9DS (Old version receiver: R10DS, R10D, R9D)
- Compatible transmitter: AT10II/AT10/AT9S Pro/AT9S/AT9
Features
- Excellent Anti-interference: Only 3ms for 12 channels synchronously, Strong anti-jumping DSSS&FHSS working synchronously to keep the excellent anti-interference performance.
- Real-time Information: Model voltage, RSSI signal strength, speed, altitude, distance and more on the LCD screen display. Support extended engine voltage telemetry module PRM-01 can feedback GPS info, Speed, voltage etc. on AT10II display when working with flight controller APM or PIX.
- Multiple Alarm: Low RSSI alarm setting, low transmitter voltage, receiver voltage and extended engine voltage alarm. DD sounds and words alarming displayed on the backlight LCD screen to avoid ignorance when you are in a noisy environment.
- Voltage Protection System: RadioLink AT10II has included a circuit which prevents damage if you plug it in the wrong way. Low consumption of battery, A 3s 1800mAh liPo battery can work for more than 12 hours.
- Suit Multiple Models: Support Radiolink’s R9DS, R12DSM, R6DS, R6DSM, R12DS, receiver. Works with most racer quads on the market, suitable for FPV racing drones, helicopters, multi-rotors, cars, boats and more.
- Programmable Mix Control: 5-12CH can be customized with programmable mix control for fine control over most basic model aircraft functions.
- Variety Switches: Switches are various lengths for easy recognition and usage. 3 VR switches, 3 three-way position switches, 4 two-way position switches, and 1 reset trainer switch. Support multiple aerial control mode and 2 PTZ *control
Useful Link
RadioLink AT10II RC Simulator Plug & Play Drone/Fixed Wing/Helicopter
Package Included
- 1 x AT10II Transmitter
- 1 x Radiolink R12DS Receiver
- 1 x Radiolink PRM-01 module
- 1 x Mode 1/2 changing parts
- 1 x Simple User Manual
- 1 x Transmitter Lanyard
Reviews
There are no reviews yet.