Address
304 North Cardinal
St. Dorchester Center, MA 02124

Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM

IDUINO RC522 RFID Starter Kit Compatible with Arduino UNO, Mega2560, Nano with ADXL345

Original price was: ₹2500.00.Current price is: ₹1799.00.

  • 1 x Uno R3 Board
  • 1 x USB Cable
  • 1 x 4 Digit 7 Segment Display
  • 1 x 1 Digit 7 Segment Display
  • 1 x L293D Motor driver IC
  • 2 x 74HC595 IC
  • 1 x Dot Matrix Display
  • 1 x IR Receiver
  • 1 x IR Remote
  • 1 x ADXL345 Acceleration Sensor
  • 5 x 104pf Capacitor
  • 1 x RGB LED
  • 1 x Relay
  • 1 x Male Header
  • 1 x RC522 RFID Module
  • 1 x SG90 Servo Motor
  • 2 x Potentiometer 10k
  • 1 x Joystick Module
  • 1 x Dht11 Module
  • 1 x 4 Cell Battery Holder
  • 1 x LED Bar Graph
  • 2 x NPN Transistor
  • 2 x PNP Transistor
  • 1 x Ultrasonic sensor Module
  • 1 x Passive Buzzer
  • 1 x Active Buzzer
  • 1 x DC Motor
  • 1 x 830 Point Breadboard
  • 2 x 1N4148 Diode
  • 2 x 1N4001 Diode
  • 2 x 10uf Electrolytic Capacitor
  • 2 x Photoresistance LDR
  • 1 x LCD1602
  • 1 x 4*4 Keyboard Membrane
  • 2 x Slide Switch
  • 4 x Small Push Button
  • 4 x Push Button and Button Cap
  • 8 x Red Led
  • 2 x Green Led
  • 2 x Blue Led
  • 2 x Yellow led
  • 1 x 40pcs Male to Male Jumper Wire
  • 1 x 20pcs Male to Female Jumper wire
  • 1 x 10pcs Female to Female Jumper
  • 1 x Resistor Card
  • 1 x 16pcs 220 Ohm Resistor
  • 1 x 10pcs 1K Ohm Resistor
  • 1 x 10pcs 10K Ohm Resistor
SKU: 85359090, B097NP82MZ Category:
  • This DIY Project kit is a very beautiful, and best gift for your children to learn programming for Arduino Uno.
  • With this kit, we will take you from knowing to utilizing the Electronics in the Real World.
  • It is easy for you to learn coding for Arduino uno R3 microcontroller.
  • IDUINO UNO R3 compatible with Arduino IDE Board included.

 

Packing Included:

  • 1 x Uno R3 Board
  • 1 x USB Cable
  • 1 x 4 Digit 7 Segment Display
  • 1 x 1 Digit 7 Segment Display
  • 1 x L293D Motor driver IC
  • 2 x 74HC595 IC
  • 1 x Dot Matrix Display
  • 1 x IR Receiver
  • 1 x IR Remote
  • 1 x ADXL345 Acceleration Sensor
  • 5 x 104pf Capacitor
  • 1 x RGB LED
  • 1 x Relay
  • 1 x Male Header
  • 1 x RC522 RFID Module
  • 1 x SG90 Servo Motor
  • 2 x Potentiometer 10k
  • 1 x Joystick Module
  • 1 x Dht11 Module
  • 1 x 4 Cell Battery Holder
  • 1 x LED Bar Graph
  • 2 x NPN Transistor
  • 2 x PNP Transistor
  • 1 x Ultrasonic sensor Module
  • 1 x Passive Buzzer
  • 1 x Active Buzzer
  • 1 x DC Motor
  • 1 x 830 Point Breadboard
  • 2 x 1N4148 Diode
  • 2 x 1N4001 Diode
  • 2 x 10uf Electrolytic Capacitor
  • 2 x Photoresistance LDR
  • 1 x LCD1602
  • 1 x 4*4 Keyboard Membrane
  • 2 x Slide Switch
  • 4 x Small Push Button
  • 4 x Push Button and Button Cap
  • 8 x Red Led
  • 2 x Green Led
  • 2 x Blue Led
  • 2 x Yellow led
  • 1 x 40pcs Male to Male Jumper Wire
  • 1 x 20pcs Male to Female Jumper wire
  • 1 x 10pcs Female to Female Jumper
  • 1 x Resistor Card
  • 1 x 16pcs 220 Ohm Resistor
  • 1 x 10pcs 1K Ohm Resistor
  • 1 x 10pcs 10K Ohm Resistor

Reviews

There are no reviews yet.

Be the first to review “IDUINO RC522 RFID Starter Kit Compatible with Arduino UNO, Mega2560, Nano with ADXL345”

Your email address will not be published. Required fields are marked *

IDUINO RC522 RFID Starter Kit Compatible with Arduino UNO, Mega2560, Nano with ADXL345