Address
304 North Cardinal
St. Dorchester Center, MA 02124

Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM

ESP32 Cam WiFi Bluetooth Camera Module Development Board With OV2640 Camera Module (ESP32 Camera)

Original price was: ₹529.00.Current price is: ₹429.00.

  • Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
  • Low-power dual-core 32-bit CPU for application processors
  • Up to 240MHz, up to 600 DMIPS
  • Built-in 520 KB SRAM, external 4M PSRAM
  • Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
  • Support OV2640 and OV7670 cameras with built-in flash
SKU: 85177010, RS2288 Categories: , ,

ESP32 CAM is a WiFi And Bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system. ESP integrates WiFi, traditional Bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc. Fully compliant with WiFi 802.11b/g/n/e/i and bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices. ESP32-CAM can be widely used in various IOT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IOT applications. It is an ideal solution for IOT applications.

ESP32 Cam Specification:

Module modelESP32-CAM
SPI Flashdefault 32Mbit
RAMinternal 520KB+external 4M PSRAM
BluetoothBluetooth 4.2BR/EDR and BLE standards
Wi-Fi802.11 b/g/n/e/i
Support interfaceUART, SPI, I2C, PWM
Support TF cardMaximum support 4G
IO port9
Serial port ratedefault 115200 bps
Image output formatJPEG (only supported by OV2640), BMP, GRAY-SCALE
Spectrum range2412 ~ 2484 MHz
Antenna formon-board PCB antenna , gain 2dBi
Transmit power802.11b: 17±2 dBm (@11Mbps)
802.11g: 14±2 dBm (@54Mbps)
802.11n: 13±2 dBm (@MCS7)
Receiving sensitivityCCK, 1 Mbps : -90dBm
CCK, 11 Mbps: -85dBm
6 Mbps (1/2 BPSK): -88dBm
54 Mbps (3/4 64-QAM): -70dBm
MCS7 (65 Mbps, 72.2 Mbps): -67dBm
Power consumptionTurn off the flash: 180mA@5V
Turn on the flash and adjust the brightness to the maximum: 310mA@5V
Deep-sleep: The lowest power consumption can reach 6mA@5V
Moderm-sleep: up to 20mA@5V
Light-sleep: up to 6.7mA@5V
SecurityWPA/WPA2/WPA2-Enterprise/WPS
Power supply range5V
Operating temperature-20 °C ~ 85 °C
Storage environment-40 °C ~ 90 °C, < 90%RH

ESP32 Cam Features:

  • Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
  • Low-power dual-core 32-bit CPU for application processors
  • Up to 240MHz, up to 600 DMIPS
  • Built-in 520 KB SRAM, external 4M PSRAM
  • Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
  • Support OV2640 and OV7670 cameras with built-in flash
  • Support for images WiFi upload
  • Support TF card
  • Support multiple sleep modes
  • Embedded Lwip and Free RTOS
  • Support STA/AP/STA+AP working mode
  • Support Smart Config/Air Kiss One-click distribution network
  • Support for serial local upgrade and remote firmware upgrade (FOTA)
  • Support secondary development

Package Included:

    • 1 x ESP32-CAM Module
    • 1 x Camera Module OV2640 2MP

Reviews

There are no reviews yet.

Be the first to review “ESP32 Cam WiFi Bluetooth Camera Module Development Board With OV2640 Camera Module (ESP32 Camera)”

Your email address will not be published. Required fields are marked *

ESP32 Cam WiFi Bluetooth Camera Module Development Board With OV2640 Camera Module (ESP32 Camera)