Address
304 North Cardinal
St. Dorchester Center, MA 02124

Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM

DC Boost Converter, 600W 12A DC-DC Step Up Converter Board 8-16V 12V 24V to 12-60V 48V Voltage Regulator Booster Module – RS1890

Original price was: ₹899.00.Current price is: ₹720.00.

  • Module Properties: non-isolated step-up module (BOOST)
  • Input Voltage: two input voltage ranges selectable (selectable with jumper on board)

    • 8-16V input ( In this input mode, please do not over-voltage input, otherwise it will burn module)
    • 12-60V input(default)
  • Input Current: 16A (MAX) Please enhance heat dissipation when current over than 10A
  • Static Current: 15mA (12V to 20V. The output voltage increase, the static current will increase a little)
SKU: 85369090, RS1890 Category:

This is a 600W boost constant current module, non-isolated, constant current range is related to input and output voltage and load. This DC boost voltage converter input 8-16V, 600W 16A Boost power module output 12-60V, large adjustable range for various electronics. This boost power converter with large heat sink, cool down fast and allow to work in lower temperature, work much more stable, Boost power supply module with LED instruction light, clearly shown working condition. Adjustable dc boost converter, easily adjust voltage and amperage by screwing CC and CV, Boost regulator module with solder-less terminals, convenient to connect with wire and need less assists.

Specification:

  • Module Properties: non-isolated step-up module (BOOST)
  • Input Voltage: two input voltage ranges selectable (selectable with jumper on board)

    • 8-16V input ( In this input mode, please do not over-voltage input, otherwise it will burn module)
    • 12-60V input(default)
  • Input Current: 16A (MAX) Please enhance heat dissipation when current over than 10A
  • Static Current: 15mA (12V to 20V. The output voltage increase, the static current will increase a little)
  • Output Voltage: 12-80V (continuously adjustable) ( the default output about 19V )
  • Output Current: 12A MAX, if over 10A please enhance heat dissipation ( the higher the dropout voltage, the smaller the current )
  • Constant Current Range: 0.1-12A
  • Output Power: = input voltage * 10A, such as: input 12V * 10A = 120W, input 24V * 10A = 240W, Input 36V * 10A = 360W, input 48V * 10A = 480W, input 60V * 10A = 600W. If you need more high-power, two modules can be used in parallel , for example if you need 15A output, then connect two modules in parallel ,the current of each module set to 8A then is OK.
  • Operating Temperature: -40°C to +85°C ( if temperature too high , please enhance heat dissipation)
  • Operating Frequency: 150KHz
  • Conversion Efficiency: up to 95% ( affected by input voltage, output volage, current and dropout voltage )
  • Operating Ripple: about 100mV
  • Load Regulation Rate: about 0.2%
  • Voltage Regulation Rate: about 2%
  • Overcurrent Protection: Yes ( input exceeds 17A, automatically reduces the output voltage , maybe have errors)
  • Short-circuit Protection: Yes (input with 20A fuse) double circuit protection, more safe.
  • Input Reverse Polarity Protection: No , ( if necessary , input add one diode in series)
  • Output Prevent Backflow: Yes, no need to add prevent backflow diode for charging .

Features:

  • DC boost voltage converter input 8-16V, 600W 16A Boost power module output 12-60V, large adjustable range for various electronics.
  • Boost power converter with large heat sink, cool down fast and allow to work in lower temperature, work much more stable, Boost power supply module with LED instruction light, clearly shown working condition.
  • Adjustable dc boost converter, easily adjust voltage and amperage by screwing CC and CV, Boost regulator module with solder-less terminals, convenient to connect with wire and need less assists.
  • High efficient step up voltage regulator, 95% conversion efficiency and low heat generated, DC boost step up converter with 20A short circus protection.
  • Boost voltage regulator versatile to charge your electronics and lithium battery with suitable voltage and amperage, drive high-power LED lights, Boost voltage stabilizer also ideal to DIY high-power power bank, solar resource voltage stabilizer and more.

Application:

  • DIY a regulated power supply, only 12V input, output 12-80V adjustable
  • Power supply for your electronic device , according to your system can set the output voltage value
  • As a vehicle power supply, power supply for your laptop/PDA etc
  • DIY a laptop mobile power supply, with 12V high capacity lithium battery pack, travel no worry
  • Solar panels regulator
  • Charge for the battery
  • Drive high-power LED

Output Current Adjustment Method:

  • Adjust CV potentiometer, according to your battery or LED, set the output voltage value to your need.
  • Counterclockwise adjust CC potentiometer about 30 laps, make the output current in the minimum.
  • Connect the LED, adjust CC potentiometer to the desired current.
  • If charge for the battery, the battery should fully discharge at the first, then connected to the output, adjust CC potentiometer to desired current. (Must use completely discharged battery to set, otherwise inaccurate. Because the more battery power remain, the smaller the charge current. )
  • Please do not use short-circuit way to adjust current, because special circuit structure of the boost converter can not adjust in that way.

Package Included:

1 x DC Boost Converter, 600W 12A DC-DC Step Up Converter Board 8-16V 12V 24V to 12-60V 48V Voltage Regulator Booster Module

Reviews

There are no reviews yet.

Be the first to review “DC Boost Converter, 600W 12A DC-DC Step Up Converter Board 8-16V 12V 24V to 12-60V 48V Voltage Regulator Booster Module – RS1890”

Your email address will not be published. Required fields are marked *

DC Boost Converter, 600W 12A DC-DC Step Up Converter Board 8-16V 12V 24V to 12-60V 48V Voltage Regulator Booster Module - RS1890