Current Detection Module 5A 12V Overcurrent Protection AC Current Detection Sensor Module

Original price was: ₹300.00.Current price is: ₹200.00.

  • Operating voltage: DC12V
  • Operating current: <20MA
  • Operating frequency range: 20Hz ~ 400Hz
  • Output mode: Switch signal output
  • Maximum detection wire diameter: 5.2mm
  • Mounting hole: hole diameter is 3mm, hole distance: 52.5mm
  • Operating environment: -40 ~ +85
  • The current detection range: AC0.3A-5A
SKU: 85437099, RS3629 Category:

Description:

This 5V 12A Current Detection Module uses a current transformer to collect the AC signal to achieve the relay over-current signal output within 0-5A. Relay pull while over-current, relay released while not over-current. Users can use the relay COM; NC, and NO three ports to control the external circuit on and off, to achieve over-current protection.

Specifications:

  • Operating voltage: DC12V
  • Operating current: <20MA
  • Operating frequency range: 20Hz ~ 400Hz
  • Output mode: Switch signal output
  • Maximum detection wire diameter: 5.2mm
  • Mounting hole: hole diameter is 3mm, hole distance: 52.5mm
  • Operating environment: -40 ~ +85
  • The current detection range: AC0.3A-5A

Function:

  • Current detection resolution can change the parameter of resistance parameters
  • The Current Detection Module has output over-current switching signal output
  • The over-current signal setting critical point adjustable

Using Instructions:

By setting the potentiometer to set the overcurrent protection point, the clockwise adjustment reduces the detection current.
As bellows:

  • Measured the wire through the current transformer, and connected VCC and GND to the DC12V power supply;
  • Adjust the potentiometer, when you hear the sound of the relay pull (can be measured with a multimeter COM and NO whether was turned on; is connected to the relay means activated), then reduce or cut off the current flowing through the tested wire; if the relay release at this time that over-current protection point has been identified (available to multimeter COM and NC measurement whether is connected; is connected to the relay means it release);
  • When reducing or cutting off the current flowing through the wire; the relay is not released, and will still need to continue to adjust the potentiometer to find the over-current protection point.

Package Included:

1 x Current Detection Module 5A 12V Overcurrent Protection AC Current Detection Sensor Module

Reviews

There are no reviews yet.

Be the first to review “Current Detection Module 5A 12V Overcurrent Protection AC Current Detection Sensor Module”

Your email address will not be published. Required fields are marked *

Current Detection Module 5A 12V Overcurrent Protection AC Current Detection Sensor Module