ESP32 CAM Programmer ESP32-CAM-MB MICRO USB Download Module for ESP32 CAM Development Board Streamlined Development

ESP32 CAM Programmer-

The ESP32 CAM Programmer is a shield that you attach to your ESP32-CAM board GPIOs. The programmer comes with the CH340C USB to serial chip. This allows you to program the ESP32-CAM using the USB port on the shield. The shield also comes with a RESET button. This may be useful to easily reset the ESP32-CAM or put it into flashing mode.

Specifications:

• Model: ESP32-CAM-MB
• Chipset: CH340G
• Connectivity: Micro-USB
• IO Port: 9
• Power Supply: 5V
• SPI Flash: Default 32Mbit
• RAM: built-in 520KB SRAM+4MB PSRAM
• Wi-Fi Mode: 802.11b/g/n/e/i
• Bluetooth Version: Bluetooth 4.2 BR/EDR and BLE standards
• Spectrum range: 2412~2484MHz
• Support TF card: maximum support 4G
• Support interface: UART, SPI, I2C, PWM
• Serial Port Baud-rate: Default 115200 bps
• Antenna Gain: 2dBi

Features:

• Supports WiFi Image Upload.
• Support multiple sleep modes.
• Embedded Lwip and FreeRTOS.
• Support secondary development.
• Support STA/AP/STA+AP working mode.
• Support OV2640 and OV7670 cameras, built-in flash.
• Support Smart Config/AirKiss one-click network configuration.
• Clock speed up to 160 MHz, Computing power up to 600 DMIPS.
• Support for serial port local and remote firmware upgrades (FOTA).

Useful Links:

Getting Started Programming ESP32-CAM With ESP32-CAM-MB Micro USB Programmer Serial Converter Loader

Package Included:

1 x ESP32 CAM Programmer ESP32-CAM-MB MICRO USB Download Module for ESP32 CAM Development Board