1.54-inch e-Ink Paper Display Module with SPI Interface comes with a 200200 resolution and embedded controller module. It is communicating via the SPI interface, and it supports partial refresh. As these displays have no backlight panels, and it doesn’t need a continuous power supply to display the (static data with periodic intervals) data on the screen, it has a great advantage of ultra-low power consumption. Also, it has a wide viewing angle, great viewing effect under sunlight, it is an ideal choice for applications such as shelf labels, industrial instruments, and so on.
E-Ink display Specification:
Operating Voltage
3.3 ~ 5V DC
Interface
3-wire SPI, 4-wire SPI
Display Color
Black and White
Grey level
2
Display Resolution
200 x 200
Display Size
1.54 inch
Partial Refresh Time
0.3s
Full Refresh Time
2s
Dot Pitch
0.138 0.138
Outline dimension
48.33 mm
Refresh Power
26.4mW(typ.)
Standby Power
<0.017 mW
Viewing Angle
>170
E-Ink display Features:
No backlight so keeps displaying last content for a long time even when the power is down
Ultra-low power consumption, basically power is only required for refreshing
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Wide viewing angle, great viewing effect under sunlight.
Interface Description:
SYMBOL
DESCRIPTION
VCC
3.3V/5V
GND
Ground
DIN
SPI MOSI pin
CLK
SPI SCK pin
CS
SPI chip selection, low active
DC
Data/Command selection (high for data, low for the command)
RST
External reset, low active
BUSY
Busy status output, high active
Package Included
1 x Waveshare 1.54-inch e-Ink Paper Display Module with SPI Interface (Res: 200 x 200)
1 x Interfacing Cable
Reviews
There are no reviews yet.
Be the first to review “Waveshare 200×200, 1.54inch E-Ink display module”Cancel Reply
Reviews
There are no reviews yet.