Waveshare 2.44 Cm (0.96 Inch) OLED Display (B) Module

This is a Waveshare 2.44 cm (0.96 Inch) OLED Display (B) module. It is a very high-contrast display with no backlight. It is perfect when you need an ultra-small display. This module supports SPI/I2C communication interfaces. It supports various hardware platforms such as Raspberry Pi/Jetson Nano/Arduino/STM32.

Comparing to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. This module provides 3 kinds of driver interfaces; they are 3-wire SPI, 4-wire SPI, and I2C interface.

OLED Display Pin Definition:

• VCC Power positive (3.3~5V power input)
• GND Ground
• NC NC
• DIN Data input
• CLK Clock signal input
• CS Chip selection, low active
• D/C Command signal, low level for command, high level for data
• RES Reset signal, low active

OLED Display Features:

• Better quality
• The IIC address can be changed, it is convenient to use with different machines.
• Four square holes are easy to install

OLED Display Specifications:

• Driver Chip : SSD1306
• Interface : 3-wire SPI, 4-wire SPI, I2C
• Resolution : 128 x 64
• Display Size : 2.44 cm (0.96 Inch)
• Colors : 1/4 yellow section, 3/4 blue section
• Visible Angle : >160
• Operating Temperature(°C) : -20~70
• Storage Temperature(°C) : -30~80
• Operating Voltage : 3.3V / 5V

Package Included:

1 x 2.44 cm (0.96 Inch) OLED Display (B)