Waveshare 0.96inch LCD Display Module for Raspberry Pi Pico, 65K Colors, 160×80, SPI

0.96inch LCD Display Module For Raspberry Pi Pico, 65K RGB Colors, 160×80 Pixels, SPI Interface

Display Module Specifications

• Operating voltage: 2.6~5.5V
• Resolution: 160×80 pixels
• Communication interface: 4-wire SPI
• Display size: 21.70 × 10.80mm
• Display panel: IPS
• Pixel size: 0.1356 × 0.135mm
• Driver: ST7735S
• Dimension : 52.00 × 25.00mm

Display Module Hardware connection :

Please take care of the direction when you connect Pico, an USB port is printed to indicate . You can also check the pin of Pico and the LCD board when connecting.
You can connect display according to the table.

• e-Paper–Pico–Description
• VCC—VSYS—Power Input
• GND—GND—GND
• DIN—GP11—MOSI pin of SPI, data transmitted from Master t Slave
• CLK—GP10—SCK pin of SPI, clock pin
• CS—GP9—Chip selection of SPI, low active
• DC—GP8—Data/Command control pin (High:data; Low: command)
• RST—GP12—Reset pin, low active
• BL—GP13—Backlight control

Package Content :

1 x Pico-LCD-0.96