TP4056 Type-C Module 1A Li-ion lithium Battery Charging Module With Current Protection – Type C – Fast, Convenient, and Safe

TP4056 Type-C-

The TP4056 Type-C is a battery charging module commonly used for charging single-cell lithium-ion or lithium-polymer batteries. It is widely utilized in portable electronic devices and DIY projects where battery charging is required. The TP4056 Type-C is designed specifically for charging single-cell lithium-ion (Li-ion) or lithium-polymer (LiPo) batteries. It’s not suitable for other types of batteries.

This TP4056 Charging Board Type C with Current Protection is a tiny module, perfect for charging single cell 3.7V 1 Ah or higher lithium-ion (Li-Ion) cells such as 16550s that don’t have their own protection circuit. Based on the TP4056 Type-C charger IC and DW01 battery protection IC this module will offer 1A charge current and then cut off when finished.

Furthermore, when the battery voltage drops below 2.4V the protection IC will switch the load off to protect the cell from running at too low of a voltage – and also protects against over-voltage and reverse polarity connection (it will usually destroy itself instead of the battery) however please check you have it connected correctly the first time.

This TP4056 Type-C module features a Type-C USB connector, which is a versatile and reversible connector commonly used for data transfer and power delivery in modern electronic devices. The TP4056 Type-C usually includes built-in protection features such as overcharge protection, over-discharge protection, and short-circuit protection to ensure safe charging.

This TP4056 Type-C module is widely used in projects that require battery-powered operation, such as portable electronic devices, battery-powered IoT nodes, and small robots or drones. The TP4056 Type-C connector provides a convenient and reversible connection, making it compatible with a wide range of modern devices and power sources.

Specifications

Features

Fast and Efficient Charging-

The TP4056 Type-C Charging Module is engineered for rapid and reliable charging. With its high charging efficiency, it ensures your devices are powered up quickly and ready for action. Perfect for portable electronics, IoT devices, and more.

Type-C Convenience-

Featuring a Type-C input port, this charging module offers modern connectivity options. It allows for reversible and hassle-free charging, ensuring you never have to fumble with connectors again. Stay up-to-date with the latest charging standards.

Safety First-

Equipped with overcharge and over-discharge protection, the TP4056 Type-C module prioritizes the safety of your devices. It prevents potential damage caused by improper charging, providing you with peace of mind for your valuable electronics.

How to Use:

• Connect Type C cable for power, or 5V DC to pads marked IN+ and IN- on the left-hand side of the module
• Connect the cell to charge to B+/B- pads on the right-hand side of the module.
• A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side
• Important! Disconnect load when charging
• The red LED indicates charging in progress, and the green LED indicates charging has finished.
• Never charge your battery at a rate greater than 1C.

Caution:

• The ampere meter can only be connected to a 5v input end of the module.
• It is better than the charging current is 37% of the battery capacity. If you charge a battery of 1000mAh, a current of 400mAh is enough.
• The connection wire should not be too thick.
• Make sure the connecting point is good.
• If the input voltage is too high, like 5.2v, the current will be less than 1000mA, which is normal. It is a protection function, that auto-subtracts the charging current to avoid burn damage to the chip.
• NO Reverse polarity.

Useful Link

Type -C TP4056 3.7v Li-ion 18650 Battery Charging With Current Protection Module

Package Included:

1 x TP4056 1A Li-ion lithium Battery Charging Module With Current Protection – Type C