Time Delay Relay DC 12V 20A Dual Display Time Relay Module Mini LED Digital Timer Relay Time Delay Cycle Time Control Switch

Time Delay Relay-

In this Module, you will get a two-timing Section Timing time T1, timing time T2 where you can set your time as per your priority and you can change the time in this chosen timing format 0-999s,0-999min,0-999h. This Module works on this particular mode delay on, delay-off, timing on, timing off, cycle on, cycle off.

Specifications

• Input Voltage: 12V
• Relay Current: 20A
• Power: < 1800w
• Timing Range: 0-999 Hrs, 0-999 Min, 0-999 Sec
• Function setting: 18 kinds of combination functions

Features

• The use of optoisolated input and output enhanced anti-jamming capability and consumption.
• The last setting parameters can be memorized after powering off.
• A signal terminal voltage signal can be maintained for a long time.
• To ensure stability, industrial grade PCB board.

How to Use

• Please pay attention to your first use. You need to wait for 6s after your setting data, the module will save the date you have set after 6s.
• Short press button SET: If you start the time setting mode, the Nixie tube will blink. You could adjust the time T1 and T2 by button+ and button-. Please wait for 5s after your set date, the module will save the date you have set after 5s.
• Long press button SET: if you start the parameter setting mode. There is two group parameter for your choice: P0 and P1. You could switch P0 or P1 by short pressing SET. Under the parameters P0 and P1, you could set the timing mode by the button+ and button-.
• P00: Timing time mode: 0999s.
• P01: Timing time mode: 0999min.
• P02: Timing time mode: 0999h.
• P10: The relay will connect after you delay the T1 time.
• P11: The relay will disconnect after you delay the T1 time.
• P12: The relay will connect after you delay the T1 time first, Then the relay will disconnect after you delay the T2 time, and it is finished.
• P13: The relay will disconnect after you delay the T1 time first, Then the relay will connect after you delay the T2 time, and it is finished.
• P14: The relay will connect after you delay the T1 time first, Then the relay will disconnect after you delay the T2 time, it is cyclic.
• P15: The relay will disconnect after you delay the T1 time first, Then the relay will connect after you delay the T2 time, it is cyclic.

Package Included

1 x Time Delay Relay DC 12V 20A Dual Display Time Relay Module Mini LED Digital Timer Relay Time Delay Cycle Time Control Switch