Address
304 North Cardinal
St. Dorchester Center, MA 02124

Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM

PL2303 – PL2303HX USB To TTL Serial UART Converter Module

Original price was: ₹75.00.Current price is: ₹55.00.

  • Imported original control chip PL2303HX,
  • A high-speed stable brush machine set two data transmission indicators can monitor the status of data transmission for 3.3V and 5V pin interface,
  • Different voltage power supply systems need a convenient brush pin interface and parallel board,
  • Rather than a vertical installation and board,
SKU: RK025 Categories: ,

A handy USB to TTL converter based on the PL2303HX.3 LEDs are on-board to indicate power, data reception, and data transmission. A 5V and 3.3V output are available–you can power your project directly from the USB port, so it functions as a USB power supply, too. The 5-pin I/O is clearly labeled on the board. A handy USB to TTL converter based on the PL2303HX. It’s a small USB to TTL serial tool, using the PL2303 chip. You can use it to connect some serial device to your PC via a USB port.

PL2303 Specification :

  • Input Supply Voltage: 3.3 ~ 5V
  • Model: PL2303
  • Support: Windows 98 to Windows 7 (32 bit and 64 bit), Mac OS 8 to OS X (32 bit and 64 bit), Linux

PL2303 Features:

  • Imported original control chip PL2303HX,
  • A high-speed stable brush machine set two data transmission indicators can monitor the status of data transmission for 3.3V and 5V pin interface,
  • Different voltage power supply systems need a convenient brush pin interface and parallel board,
  • Rather than a vertical installation and board,
  • Leads to the DuPont line convenient brush machine of the entire circuit board with high-quality transparent heat shrinkable coating,
  • The piece circuit and the outside into the insulating state In order to protect the metal board from the accidental short circuit and burned,
  • Due to the use of transparent material, it does not affect the board and watches the lights mouth screen monitoring effect
  • The 5-pin I/O is clearly labeled on the board. Excellent driver support–drivers are available for Windows 98 to Windows 7 (32-bit and 64-bit), Mac OS 8 to OS X (32-bit and 64-bit), and Linux. Even Android is supported!

Application:

  • All kinds of satellite set-top box upgrades.
  • Router, HDD, ADSL, broadband modem firmware upgrade, or cracked upgrade.
  • cellphone, XBOX360, GPS serial communication, vehicle inspection and test, DVD flash, and so on.
  • Burn writes STC MCU, NXP MCU, Renesas MCU, NEC MCU, and so on.
  • Simple UART communication commonly used UART debugging tools in the supper terminal.
  • USB signal transferred to the TTL signal may be used by electronic enthusiasts.

Package Included:

1 x  PL2303 USB to Serial Module for Arduino Raspberry PI & Other MCU


Reviews

There are no reviews yet.

Be the first to review “PL2303 – PL2303HX USB To TTL Serial UART Converter Module”

Your email address will not be published. Required fields are marked *

PL2303 - PL2303HX USB To TTL Serial UART Converter Module