Waveshare 2.9inch E-Paper E-Ink Display Module For Raspberry Pi Pico, 296×128, Black / White, SPI

2.9inch E-Paper E-Ink Display EPD (Electronic Paper Display) Module For Raspberry Pi Pico, 296 × 128 Pixels, Black / White, SPI Interface.

E-Ink Display Features :

• No backlight, keeps displaying last content for a long time even when power down
• Ultra low power consumption, basically power is only required for refreshing
• SPI interface, requires minimal IO pins
• Onboard voltage translator, compatible with 3.3V / 5V MCUs
• Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)

E-Ink Display Specification:

• Dimension: 66.89mm × 29.05mm
• Outline dimensions (raw panel): 79.0mm × 36.7mm × 1.05mm
• Outline dimension(with driver board): 82.0mm × 38.0mm
• Display size: 2.9inch
• Operating voltage: 3.3V/5V
• Interface: SPI
• Dot pitch: 0.227 × 0.226
• Resolution: 296 × 128 pixels
• Display color: Black, white
• Grayscale: 2
• Partial refresh time: 0.3s
• full refresh time: 2s
• Refresh power: 26.4mW (typ.)
• Standby current: <0.01uA (almost none)

【Note】

• Refresh time: The refresh time is the experimental results, the actual refresh time will have errors, and the actual effect shall prevail. There will be a flickering effect during the global refresh process, this is a normal phenomenon.
• Power consumption: The power consumption data is the experimental results. The actual power consumption will have a certain error due to the existence of the driver board and the actual use situation. The actual effect shall prevail.

Package Included :

• Pico-ePaper-2.9 x1
• PH2.0 8PIN wire 20cm x1
• Standoff pack x1