Ai Thinker Ra-01SCH-P LoRa Module SX1276 Based Long-Range Wireless Transceiver with SPI Interface

Original price was: ₹500.00.Current price is: ₹400.00.

  • Support FSK, GFSK, LoRa® modulation
  • Support frequency band: 803MHz~930MHz
  • Maximum transmit power is optional (see the design guide below for the configuration method)
    ① Default configuration: The internal PA uses a 3.3V power supply voltage. In this state, the maximum Tx Power can reach +29dBm, and the operating current is 750mA;
    ② Optional configuration: The internal PA uses a 5V power supply voltage. In this state, the maximum Tx Power can reach +31dBm, and the operating current is 1A;
  • High sensitivity: as low as -137dBm@SF10 125KHz
  • Extremely small size 17*16*3.2(±0.2)MM, double row stamp hole patch package
    Support spreading factors SF5/SF6/SF7/SF8/SF9/SF10/SF11
  • It has low power consumption in the receiving state, and the minimum receiving current is 16mA.
  • The module uses an SPI interface, half-duplex communication, CRC, and up to 256 bytes of data packet engine.
  • Support a variety of antenna installation methods, compatible with half-hole pad/through-hole pad/IPEX connector.
SKU: 85437099, RS8436 Category:

Description:

Ra-01SCH-P is a LoRa series module designed and developed by Shenzhen Ai-Thinker
Technology Co., Ltd. This module is used for ultra-long-distance spread-spectrum communication. Its RF chip LLCC68+ mainly uses LoRa™ long-range modem for ultra-long distance spread spectrum communication, with strong anti-interference and the ability to minimize current consumption. With the help of SEMTECH’s LoRa™ patented modulation technology, the module has a built-in power amplifier (PA) and low noise amplifier (LNA) on this basis, with high sensitivity exceeding -137dBm, +29dBm transmission power, long transmission distance, and high reliability.

At the same time, compared with traditional modulation technology, LoRa™ modulation technology also has obvious advantages in anti-blocking and selection, solving the problem that traditional design solutions cannot take into account distance, anti-interference, and power consumption at the same time.

Specifications:

  • Model: Ra-01SCH-P
  • Antenna: Compatible with half-hole pad/through-hole pad/IPEX connector
  • Frequency: 803MHz~930MHz
  • Operating temperature: -40℃~ 85℃
  • Storage temperature:  -40℃~ 125℃, < 90%RH
  • Power supply: Supply voltage 3.0~3.6V, typical value 3.3V, current greater than1A
  • Interface: SPI
  • Programmable bit rate:  Up to 300kbps

Features:

  • Support FSK, GFSK, LoRa® modulation
  • Support frequency band: 803MHz~930MHz
  • Maximum transmit power is optional (see the design guide below for the configuration method)
    ① Default configuration: The internal PA uses a 3.3V power supply voltage. In this state, the maximum Tx Power can reach +29dBm, and the operating current is 750mA;
    ② Optional configuration: The internal PA uses a 5V power supply voltage. In this state, the maximum Tx Power can reach +31dBm, and the operating current is 1A;
  • High sensitivity: as low as -137dBm@SF10 125KHz
  • Extremely small size 17*16*3.2(±0.2)MM, double row stamp hole patch package
    Support spreading factors SF5/SF6/SF7/SF8/SF9/SF10/SF11
  • It has low power consumption in the receiving state, and the minimum receiving current is 16mA.
  • The module uses an SPI interface, half-duplex communication, CRC, and up to 256 bytes of data packet engine.
  • Support a variety of antenna installation methods, compatible with half-hole pad/through-hole pad/IPEX connector.

Useful Link:

Ai Thinker Ra-01SCH-P LoRa Module

Package Included:

1 x Ai Thinker Ra-01SCH-P LoRa Module 

Reviews

There are no reviews yet.

Be the first to review “Ai Thinker Ra-01SCH-P LoRa Module SX1276 Based Long-Range Wireless Transceiver with SPI Interface”

Your email address will not be published. Required fields are marked *

Ai Thinker Ra-01SCH-P LoRa Module SX1276 Based Long-Range Wireless Transceiver with SPI Interface