DSO138 Oscilloscope Kit 2.4″ TFT 1Msps Digital Oscilloscope Probe Lead With Acrylic Cell

• Power Input: DC 9V(Power adapter is not included)
• Maximum Real-Time Sampling Rate: 1Msps
• Accuracy: 12Bit
• Sampling Buffer Depth: 1024 bytes
• Analog Bandwidth: 0 – 200KHz
• Vertical Sensitivity: 10mV / Div – 5V / Div ( 1-2-5 progressive manner)
• Input Impedance: 1MΩ
• Maximum Input Voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)
• The Horizontal Time Base Range: 10μs / Div – 50s / Div (1-2-5 progressive manner)

Features

• STM32F103C8 Microcontroller: The DSO138 Oscilloscope Kit Uses ARM Cortex-M3 Processor, and Includes a 2.4″ Color TFT Display Screen, which Can be Used as ARM Test Development Board.
• Various Digital Waveform Display: Including Frequency, Cycle, Pulse Width, Max/Min, Average, Peak Value and Effective Value, Can be Triggered by Rising or Falling Edges, Perfect for Arduino etc.
• HOLD Function: With Automatic, Conventional and Single Trigger Mode Can Freeze at Any Time Waveform Display.
• Fully Assembled and Soldered Professionally: Has been Soldered All the SMD, Including the Acrylic Case Kits, Need to be Installed by Yourself.
• Adjustable Vertical Displacement, and with Instructions, which Increase the Likelihood of Adding Different Features or Developing New Applications on the Hardware for Users.
• Coupling modes include DC / AC / GND.
• With automatic, regular and one-shot modes, easy to capture the moment waveform.
• Available rising or falling edge trigger.
• Adjustable trigger level position, and with instructions.
• Observable trigger waveform before ( negative delay).
• Can freeze at any time waveform display (HOLD function).
• Comes 1Hz /3.3V square wave test signal source.

Package Included

• 1 x DSO138 Digital Oscilloscope
• 1 x Acrylic Cell