Micro Brushless Ducted Fan High Voltage 100000rpm CNC Aluminum Impeller Hair Dryer Ultra High Speed Brushless Motor

Specification:

The 100000-turn ultra-high-speed mini brushless ducted fan with disassembled machine has a good overall color. There is basically no dust on the wind blades. The work of the fan is good. The measured voltage CNC machining aluminum alloy impeller is equipped with laser dynamic balance correction. It was originally used on high-end hair dryers.

The stator of this fan motor is relatively easy to disassemble, because the stator does not need high-strength thread glue, and directly uses 2 flat screws to support the stator, and then pushes against the edge of the housing to pry hard. Generally, it is not very difficult to disassemble. After disassembling, the coil can be rewound by itself. Netizens feedback about 12-15 turns of 0.4-0.5mm, and Y-shaped wiring method is used, and 12V brushless electric drive is allowed.

The motor is a high-voltage three-phase high-speed brushless motor. The low-voltage drive speed is relatively slow. You can change the coil winding low-voltage drive by yourself. This type of coil stator is very convenient to disassemble. The actual measurement can also run with brushless electric speed 12V, which is slow. The low-speed running sound of the motor is relatively quiet.

The fan has a diameter of 29mm, a nominal voltage of 310V, a power of 110W, a rotating speed of more than 100000 revolutions, and a motor weight of about 58 grams.

Specifications:

Package List:

Motor x 1pcs