YZC-131 With Wires Weighing Load Cell Sensor 1Kg for Electronic Kitchen Scale YZC-131 With Wires

YZC-131 With Wires –

This straight bar load cell (sometimes called a strain gauge) can translate up to 1 kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional to, the strain (e.g. pressure or force) applied to the bar. With this gauge, you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface. This straight bar load cell is made from an aluminium alloy and is capable of reading a capacity of 1 kg of weight. It has Four lead wires which can be connected toHX711 A/D pressure sensor. It is easy to use with a driving voltage of 5-10V and produces the output voltage as per the force changes over it. Installation of the Sensor is also a simple task, it needs to fix one end through the screw hole and the other end left floating state, according to the label indicates the direction of the gravitational force exerted particular attention must not directly push the white plastic cover part of the sensor in order to avoid damage.

Specifications:

• Model: YZC-131
• Material: Aluminium
• Weighing Range: 0~1kg
• Rated Output: 1.0 ± 0.1mV / V
• Non-Linear Output: ± 0.03% F.S
• Input Impedance: 1066 ± 10% Ω
• Output Impedance: 1000 ± 10% Ω
• Insulation Resistance: 2000 MΩ
• Hysteresis: 0.03% F.S
• Repeatability: 0.03% F.S
• Creep: (5 minutes) 0.05% F.S
• Zero Balance: ± 0.1 mV / V
• Cable Length: 18 cm
• Operating Temperature Range: -20 ~ 65°C

Package Included:

1 x YZC-131 With Wires Weighing Load Cell Sensor 1Kg for Electronic Kitchen Scale YZC-131 With Wires