TB6612 Motor Driver-

This is a new drive device that can independently control two bidirectional DC motors. It has a high level of integration, while providing sufficient output capability, operating performance and energy consumption also have advantages, so the integration miniaturization of the motor control system, can be ideal as a motor driving device. It has a high current MOSFET-H-bridge and dual circuit outputs that can drive two motors.

Motor Driver TB6612FNG Module 3PI Supporting highest output per channel 1.2 A continuous drive current, peak current start-up 2A/3.2 A (continuous pulse / single pulse). It has 4 kinds of motor control modes: Forward / Reverse / Brake / Stop. The TB6612 Motor Driver is a dual-channel H-bridge motor driver module used to control the direction and speed of DC motors. It’s a versatile component widely used in robotics, RC vehicles, and various other applications where precise motor control is required.

TB6612FNG highest output per channel 1.2 A continuous drive current, peak current start-up 2A/3.2 A (continuous pulse / single pulse); 4 kinds of motor control modes: Forward / Reverse / Brake / Stop; PWM supports frequencies up to 100 kHz; standby mode; chip low-voltage detection circuit and thermal shutdown protection circuit; working temperature: -20 ~ 85 °; SSOP24 small SMD package.

Compared with the traditional L298N, the efficiency of this module is much higher and the size is also greatly reduced. In the rated range, the chip basically does not get hot, so we recommend friends with a certain degree of hands-on ability to use it. Be careful when wiring. Positive and negative polarity.

The TB6612 module is equipped with an H-bridge circuit for each channel. This allows it to control the rotation direction and speed of two DC motors independently. It supports Pulse Width Modulation (PWM) for speed control. By adjusting the PWM signal’s duty cycle, you can vary the motor’s speed.

The constitute use Motor Driver TB6612FNG Module 3PI Supporting and DC motor control unit MCU and its application in the wheeled mobile robot system in the differential drive. Test runs showed that this combination of devices and SCM applications achieves a stable and flexible motor drive control. TB6612FNG achieve in terms of integration, performance and output capability to run a better balance for single, dual DC motor design and development of a digital control system.

Specifications

Supply Voltage (VCC): 5V
Motor Supply Voltage (VM): 5V ~ 13.5V
Continuous Drive Current: 1.2A Output per Channel
Peak Current: 2A/3.2 A (continuous pulse / single pulse)
PWM Supports Frequencies: 100kHz
Working Temperature: -20 ~ 85 °C

Features

Smooth and Reliable Motor Control-

The TB6612 Motor Driver is engineered for precise and reliable motor control. With dual H-bridges, it provides seamless forward and reverse motion control for your projects. Whether you’re building robots, drones, or other motor-driven systems, this driver ensures smooth operation.

High Current Handling-

Equipped to handle high currents, the TB6612 driver is designed for power-hungry applications. It can manage the demands of larger motors, ensuring they operate at their full potential. Say goodbye to underpowered projects and experience the true capability of your motors.

Compact and Efficient-

With its compact form factor, the TB6612 driver can be easily integrated into a wide range of projects. Its efficient design minimizes power loss, making it suitable for battery-powered applications. Enjoy powerful motor control without sacrificing precious space or energy.